Amprobe ACD-21SW 600V Swivel Clamp Meter with Temperature and VolTect Non-Contact Voltage Detection

today I will provide interesting information for you, you can get a Amprobe ACD-21SW 600V Swivel Clamp Meter with Temperature and VolTect Non-Contact Voltage Detection at a very cheap price especially for This day. But before you continue reading, please see reviews about Amprobe ACD-21SW 600V Swivel Clamp Meter with Temperature and VolTect Non-Contact Voltage Detection below

Features :

• Non-contact voltage detector senses AC voltage without making contact with the circuit.
• Digital clamp meter measures alternating current (AC) to 400 amp, direct current (DC) voltage and AC voltage to 600 volts (V).
• Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 600V.

Description

The Amprobe ACD-21SW digital clamp meter with swivel clamp, non-contact voltage detector, and included temperature probe is an average-sensing. It has a transformer clamp that measures alternating current (AC) to 400 amp. The meter comes with detachable test leads that measure direct current (DC) voltage and AC voltage to 600 volts (V), capacitance to 4 millifarads, and resistance to 40 megaohms. The clamp has two jaws that can close around a conductor up to 1. 18" (30 mm) in diameter to measure current or frequency without touching or interrupting the circuit. It swivels 180 degrees to allow the liquid crystal display (LCD) to be seen when taking readings in hard-to-reach areas. The meter's non-contact voltage detector senses AC voltage without making contact with the circuit. The meter comes with a K-type thermocouple probe for measuring temperature. The hold function keeps the reading on the display, even after the meter is disconnected. The unit automatically turns off after 10 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A finger guard on the body of the meter helps protect fingers from shock. This average sensing, or average responding. Two ranging modes (auto or manual) offer a range of operator control when taking readings. When turned on, the meter will be in auto-ranging mode and will automatically select the correct operating range for the property being measured. It can be switched to manual-ranging mode, which requires that the operator choose the appropriate operating range. The meter has a 4, 000-count resolution, meaning that it can display up to 3. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 600V, which covers items used with enclosed building circuit installations (such as service panel parts, branch circuits. The unit comes with a soft vinyl carrying case. SpecificationsMaximum alternating current (AC) input400 ampMaximum AC voltage input600VMaximum direct current (DC) voltage input600VMaximum resistance detected40 megaohmsMaximum capacitance detected4 millifaradsTemperature measurement range-30 to 400 degrees Fahrenheit (F)/-35 to 400 degrees Celsius (C)Power supply1. 5V LR03 AAA batteries (two, installed)Standards met and certificationsEuropean Normal (EN); International Electrotechnical Commission (IEC) and EN safety standard 61010-1; European Conformity (CE); Canadian Standards Association (CSA); and Australia N10140Weight7. 7 oz. /220 gMeter dimensions9. 5 x 2. 8 x 1. 6 inches/240 x 70 x 41 mm (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width. Clamp meters (also called clamp-on meters) measure electrical current without cutting through wires or touching or interrupting the electrical circuit. Available in handheld or benchtop models, clamp meters diagnose problems in electrical equipment, wiring. The meter's current clamp has two jaws that fit around a conductor to take measurements. All clamp meters test for current. Some come with test leads and inputs for measuring voltage, capacitance.

Similar