2.5" 4-Jaw Independent Chuck

and so forth I will provide interesting information for you, you can get a 2.5" 4-Jaw Independent Chuck at a very cheap price especially for This day. But before you continue reading, please see reviews about 2.5" 4-Jaw Independent Chuck below

Features :

• -16 thread fits Sherline spindles.
• Hardened steel reversible jaws.
• Hold parts from 3/32 to 1-3/16 in regular position, to 2-1/4 with jaws reversed.
• Jaws adjust independently to allow perfect centering of material.

Description

4-jaw independent chucks allow work to be held either perfectly on center or purposely off-center by adjusting each of the four jaws independently. Using a dial indicator and by careful adjustment of the jaws, a part can be adjusted until it is perfectly on center. This is known as having "zero runout. " Though somewhat more time consuming to adjust than a self-centering chuck, it does allow for a much higher degree of accuracy. Typically, self-centering chucks. 003 inches. " If total accuracy is your goal, an independent chuck is what you need. This chuck is also available in a larger 3. 1" diameter as P/N 1030. For use with Sherline machine tools.

Similar